Hi there folks,I bought two dl380p g8 from an auction for my homelab, both have same problem of fail to power on, here is my diagnostics so far:Using minimal configuradion CPU1-only and 1 Memory in 12A → plug energy → power self test start then port 84 cr8 blinking 12 times and cr7 stay on front power led amber and heartbeat blinking red → press power button → starts power sequence → CR807/CR808 briefly illuminate than go off → server shuts down but keeps trying to start. I can acess the ilo4 with browser and ssh and here is the code error:(XR: 24 00 MID: FF 0D FE FF C0 FF FF 2D 2D 0C 0C 00 1E 00 00 A2 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00)Tried different cpus, memory and psus nothing changed... i have no idea what to do tried to probe around the board with microscope to see if i find anything cracked or burned, tried finding any short using a multimeter but nothing...What more can i do to try to diagnose and fix those servers? Any ideas are appreciated.
| # | Наименование новости | Тональность | Информативность | Дата публикации |
|---|---|---|---|---|
| 1 | want EOL and EOSL of servers | 0 | 16.12 | 30-09-2026 |
| 2 | UUID erro | 0 | 21.89 | 25-09-2026 |
| 3 | HPE ProLiant DL360 Gen10 -iLO5 credentials reset | 0 | 7.29 | 05-10-2026 |
| 4 | I cannot locate the correct system rom update file(s) for our HPE DL380 Gen 10 servers | 0 | 13.87 | 02-10-2026 |
| 5 | DL380Gen12: memory mirroring mode Partial Mirror (OS Configured) not working with ESXi | 0 | 6.56 | 29-09-2026 |
| 6 | SmartCache configuration on SR932i-p | 0 | 14.26 | 03-10-2026 |
| 7 | Gen10 server with mr416i-p gen 10plus nvme support | 0 | 14.14 | 30-09-2026 |
| 8 | I want to update all the HP280gn12 server all drivers included BIOS Firmware | 0 | 7.04 | 24-09-2026 |
| 9 | Re: CUCM Installation on EVE-NG – Request for Lab/Demo Image (ISO/QCOW | 0 | 15.69 | 05-10-2026 |
| 10 | Flickering, Screen Tearing in Grub, the Boot Up Process, & Log In Asus Triple Booted Rig | 0 | 8.71 | 05-10-2026 |