[1] Siron, O., and J. Lamon. "Damage and failure mechanisms of a3-directional carbon/carbon composite under uniaxial tensile and shear loads." Acta materialia 46, no. 18 (1998): 6631-6643.

DOI: 10.1016/s1359-6454(98)00269-9

Google Scholar

[2] Aly-Hassan, Mohamed S., Hiroshi Hatta, Shuichi Wakayama, Mitsuhiro Watanabe, and Kiyoshi Miyagawa. "Comparison of 2D and 3D carbon/carbon composites with respect to damage and fracture resistance." Carbon 41, no. 5 (2003): 1069-1078.

DOI: 10.1016/s0008-6223(02)00442-6

Google Scholar

[3] Davies, Ian J., and Rees D. Rawlings. "Mechanical properties in compression of CVI-densified porous carbon/carbon composite." Composites science and technology 59, no. 1 (1999): 97-104.

DOI: 10.1016/s0266-3538(98)00059-1

Google Scholar

[4] Adams, Donald F. "Micro-analysis of the behaviour of a three-dimensionally-reinforced Carbon-Carbon composite material." Materials Science and Engineering 23, no.1(1976):55- 68.

DOI: 10.1016/0025-5416(76)90086-0

Google Scholar

[5] Bhagat, Atul Ramesh, and Puneet Mahajan. "Characterization and damage evaluation of coal tar pitch carbon matrix used in Carbon/Carbon composites." Journal of Materials Engineering and Performance 25 (2016): 3904-3911.

DOI: 10.1007/s11665-016-2213-2

Google Scholar

[6] Sharma, Rajneesh, Atul Ramesh Bhagat, and Puneet Mahajan. "Finite element analysis for mechanical characterization of 4D inplane carbon/carbon composite with imperfect microstructure." Latin American Journal of Solids and Structures 11 (2014): 170-184.

DOI: 10.1590/s1679-78252014000200002

Google Scholar

[7] Bhagat Atul Ramesh, and Puneet Mahajan. "Homogenization and Multiscale Analysis of 3D Carbon–Carbon Composites Using Eigendeformation Technique." Journal of Materials Engineering and Performance 29, no. 1 (2020): 365-376.

DOI: 10.1007/s11665-020-04578-3

Google Scholar

[8] Bhagat Atul Ramesh, and K. H. Sinnur. "Characterization And Modeling of Interfaces in 3D Carbon Carbon Hybrid Composites." Composite Interfaces 29, no. 4 (2022): 397-411.

DOI: 10.1080/09276440.2021.1949115

Google Scholar

[9] Odegard, G., and M. Kumosa. "Determination of shear strength of unidirectional composite materials with the Iosipescu and 10 off-axis shear tests." Composites Science and Technology 60, no. 16 (2000): 2917-2943.

DOI: 10.1016/s0266-3538(00)00141-x

Google Scholar

[10] Xavier, J. C., N. M. Garrido, M. Oliveira, J. L. Morais, Pedro Ponces Camanho, and Fabrice Pierron. "A comparison between the Iosipescu and off-axis shear test methods for the characterization of Pinus Pinaster Ait." Composites Part A: Applied Science and Manufacturing 35, no. 7-8 (2004): 827-840.

DOI: 10.1016/j.compositesa.2004.01.013

Google Scholar

[11] Tarnopol'skii, Yu M., A. K. Arnautov, and V. L. Kulakov. "Methods of determination of shear properties of textile composites." Composites Part A: Applied Science and Manufacturing 30, no. 7 (1999): 879-885.

DOI: 10.1016/s1359-835x(98)00194-8

Google Scholar

[12] Denk, Lars, Hiroshi Hatta, Akihiro Misawa, and Satoshi Somiya. "Shear fracture of CF/C composites with variable stacking sequence." Carbon 39, no. 10 (2001): 1505-1513.

DOI: 10.1016/s0008-6223(00)00278-5

Google Scholar

[13] Taheri-Behrooz, F., M. Esmkhani, A. Yaghoobi-Chatroodi, and S. M. Ghoreishi. "Out-of-plane shear properties of glass/epoxy composites enhanced with carbon-nanofibers." Polymer Testing 55 (2016): 278-286.

DOI: 10.1016/j.polymertesting.2016.09.003

Google Scholar

[14] Rosselli, F., and M. H. Santare. "Comparison of the short beam shear (SBS) and interlaminar shear device (ISD) tests." Composites Part A: Applied Science and Manufacturing 28, no. 6 (1997): 587-594.

DOI: 10.1016/s1359-835x(97)00009-2

Google Scholar

[15] Labanieh, Ahmad Rashed, Yang Liu, Dmytro Vasiukov, Damien Soulat, and Stéphane Panier. "Influence of off-axis in-plane yarns on the mechanical properties of 3D composites." Composites Part A: Applied Science and Manufacturing 98 (2017): 45-57.

DOI: 10.1016/j.compositesa.2017.03.009

Google Scholar

[16] Pahr, Dieter H., Franz G. Rammerstorfer, P. Rosenkranz, K. Humer, and H. W. Weber. "A study of short-beam-shear and double-lap-shear specimens of glass fabric/epoxy composites." Composites Part B: Engineering 33, no. 2 (2002): 125-132.

DOI: 10.1016/s1359-8368(01)00063-4

Google Scholar

[17] Meza, Lucas R., Jim MJ Schormans, Joris JC Remmers, and Vikram S. Deshpande. "Shear response of 3D non-woven carbon fibre reinforced composites." Journal of the Mechanics and Physics of Solids 125 (2019): 276-297.

DOI: 10.1016/j.jmps.2018.12.019

Google Scholar

[18] ASTM D5379 Iosipescu Shear Test Fixture Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

DOI: 10.1520/d5379_d5379m-19

Google Scholar

[19] Chiang, Martin YM, and Jianmei He. "An analytical assessment of using the Iosipescu shear test for hybrid composites." Composites Part B: Engineering 33, no. 6 (2002): 461-470.

DOI: 10.1016/s1359-8368(02)00022-7

Google Scholar

[20] Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method. ISO 14130:(1997)

DOI: 10.3403/01271434

Google Scholar

[21] Whitney J.M., and C.E. Browning. "On short-beam shear tests for composite materials." Experimental Mechanics 25 (1985): 294-300.

DOI: 10.1007/bf02325100

Google Scholar

[22] Devi, G. Rohini, and K. Rama Rao. "Carbon Carbon Composites: An Overview." Defence Science Journal 43, no. 4 (1993): 369.

Google Scholar